| dc.contributor.author | SUDARISMAN, ... | |
| dc.date.accessioned | 2020-05-13T05:19:17Z | |
| dc.date.available | 2020-05-13T05:19:17Z | |
| dc.date.issued | 2020-02-22 | |
| dc.identifier.citation | Sudarisman. 2020. Fabrikasi dan Karakterisasi Tekan dan Impak Komposit Serat Ijuk/Polimer. Prosiding: 11th University Research Colloquium, Yogyakarta, 22 Februari 2020 | en_US |
| dc.identifier.issn | Belum_keluar | |
| dc.identifier.uri | http://repository.umy.ac.id/handle/123456789/33392 | |
| dc.description.abstract | Randomly oriented chopped sugar palm fiber (SPF)-reinforced epoxy
and –reinforced polyester has successfully been fabricated, and their
compressive and impact properties have been evaluated. Prior to
being used as reinforcement, the SPF was alkali-treated and chopped
into 20 mm long. Specimens were cut from a composite plate panel
fabricated by means of cold-pressed molding. Compressive and
impact tests were carried out according to the AASTM D3410 and
ASTM D5410, respectively. It was found that compressive strength and strain-to-failure of SPF/epoxy samples were lower than those of the SFP/polyester samples, but to the contrary, compressive modulus of the SPF/epoxy samples were higher than that of the SPF/polyester samples. Impact toughness of SPF/epoxy specimens was found being higher than that of the SPF/polyester specimens. | en_US |
| dc.description.sponsorship | Personal | en_US |
| dc.publisher | Univ Aisyiyah Yogyakarta | en_US |
| dc.subject | SPF/epoxy | en_US |
| dc.subject | SPF/polyester | en_US |
| dc.subject | compressive properties | en_US |
| dc.subject | Simpact properties | en_US |
| dc.title | Fabrikasi dan Karakterisasi Tekan dan Impak Komposit Serat Ijuk/Polimer | en_US |
| dc.type | Article | en_US |
